Skip to main content
Loading…
This section is included in your selections.

A. District Purpose. The purpose of the Mixed Manufacturing (MM) district is to:

1. Implement the West Berkeley Plan MM designation;

2. Encourage development of a general manufacturing district for the full range of manufacturers, including larger scale materials processing manufacturers sometimes known as heavy manufacturers;

3. Encourage development of a manufacturing district targeted to manufacturing and industrial uses, so that manufacturers and industrial businesses will not be interfered with by incompatible uses;

4. Encourage the creation and continuation of well paid (often unionized) jobs for men and women without advanced degrees;

5. Provide an appropriate location for the development of compatible industries which can provide high quality employment for people at all educational levels, and add significantly to the tax base, such as the biotechnology industry;

6. Allow reuse of upper story industrial space as offices to facilitate use of upper story space;

7. Maintain and improve the quality of the West Berkeley environment, while allowing the lawful and reasonable operation of the full range of manufacturers; and

8. Support the development of industrial businesses which contribute to the maintenance and improvement of the environment.

B. Land Use Regulations.

1. Allowed Land Uses. See Table 23.206-1: Allowed Land Uses in Manufacturing Districts.

2. Office Uses.

(a) Office uses are allowed in the MM district only above the ground floor. Ground floor office uses are not permitted unless ancillary to a permitted use.

(b) If the office use is established above a non-manufacturing use or replaces an existing manufacturing, warehousing or wholesale trade use, an AUP is required.

C. Additional Permit Requirements. See Section 23.206.030--Additional Permit Requirements.

D. Development Standards. See Table 23.206-11 for development standards in the MM district.

Table 23.206-11. MM DEVELOPMENT STANDARDS

BASIC STANDARDS

SUPPLEMENTAL STANDARDS

Lot Area, Minimum

20,000 sq. ft.

23.304.020--Lot Requirements

Usable Open Space Per Dwelling Unit, Minimum

n/a

Floor Area Ratio, Maximum

2.0

Main Building Height, Maximum

45 ft.

23.304.050--Building Height

Lot Line Setbacks, Minimum

23.304.030--Setbacks

Front

No minimum

Rear

No minimum

Interior Side

No minimum

Street Side

No minimum

Building Separation, Minimum

No minimum

Lot Coverage, Maximum

100%

E. Permit Findings. See Section 23.206.100--Permit Findings. (Ord. 7787-NS § 2 (Exh. A), 2021)