23.106.070 Setbacks.
A. Measurement. A required setback is measured as the distance between the surface of a building’s outer wall and the applicable lot line.
B. Setback Areas. As shown in Figure 23.106-3: Setbacks, a setback area means the required open area on a lot that is between a lot line and a setback line. A setback area must be unoccupied and unobstructed from the ground upward by any portion of a building or structure except as otherwise permitted by the Zoning Ordinance. Required setback areas are defined as follows:
1. Front Setback Area: The area extending across the full width of the front of a lot from the front lot line to the front setback line.
2. Rear Setback Area: The area extending across the full width of the lot between the rear lot line and the rear setback line.
3. Interior Side Setback Area: The area between an interior side lot line and the side setback line, and extending from the front lot line to the rear lot line.
4. Street Side Setback Area: The area between a street side lot line and the side setback line, and extending from the front lot line to the rear lot line.
(Ord. 7787-NS § 2 (Exh. A), 2021)