Skip to main content
Loading…
This section is included in your selections.

A. Zoning Map Boundaries. Where uncertainty exists as to the boundaries of districts shown on the Zoning Map, the following rules apply:

1. Boundaries shown as approximately following lot lines are construed to follow the lot lines.

2. Boundaries shown as approximately following the centerlines of streets, highways, and alleys are construed to follow the centerlines.

3. Boundaries shown as approximately following city limits are construed to follow city limits.

4. Where a district boundary divides a lot, the location of the boundary is determined by the use of the scale appearing on the Zoning Map unless otherwise indicated by a legal description of the property.

B. Lots Containing Two or More Districts.

1. For lots containing two or more districts, each part of the lot is subject to the regulations of district in which it is located, except as allowed by Paragraph (2) below.

2. The City may apply the setback requirements in one part of a lot to a part of the lot located in another district with a Use Permit, subject to the following:

(a) The development intensity (residential density and/or floor area ratio) of the project may not exceed the development intensity that would be allowed if the setbacks requirements are not adjusted; and

(b) Allowed land uses in each part of the lot are only as permitted in the district in which it is located. (Ord. 7787-NS § 2 (Exh. A), 2021)