Chapter 21.40 DESIGN REQUIREMENTS*
This chapter is included in your selections.
Sections:
- 21.40.010 General.
- 21.40.020 Street pattern.
- 21.40.030 Centerline of through streets and highways.
- 21.40.040 Widths of streets.
- 21.40.050 Grades and curves.
- 21.40.060 Private streets or ways prohibited.
- 21.40.070 Reserved strips.
- 21.40.080 Street intersection requirements.
- 21.40.090 Alley intersection requirements.
- 21.40.100 Courts or non-connecting streets.
- 21.40.110 Continuation of existing street names.
- 21.40.120 Requirements for future streets.
- 21.40.130 Dead-end streets.
- 21.40.140 Block length when adjacent to major thoroughfares.
- 21.40.150 Corner radii of blocks.
- 21.40.160 Minimum lot size.
- 21.40.170 Required allowance for future resubdivision.
- 21.40.180 Lot side lines.
- 21.40.190 Lot frontage requirements.
- 21.40.200 Width--Corner lots.
- 21.40.210 Width--Interior lots.
- 21.40.220 Width--Lots on curved streets.
- 21.40.230 Width--Lots on dead-end street turn-arounds or curved streets.
- 21.40.240 Double frontage lots prohibited--Exceptions.
- 21.40.250 Requirements for watercourse easements or right-of-way dedications.
- 21.40.260 Flood hazard protection requirements.
- 21.40.270 Grading, erosion and sediment control requirements.
- 21.40.280 Dedication requirements--Easement widths.
*For natural watercourse requirements generally, see Chapter 17.08 of this code; for erosion and sediment control requirements generally, see regulations on file with the Department of Public Works.